OpenBCM (Win32) – (X)Net – XGLUE and SOUNDCARD Setup To be able to work with OpenBCM and sound card is necessary to have AGWPE and XGLUE, but if it is still wanted to go a little beyond this simple configuration, then we can hook it to our (X)Net, having this way the possibility to make forward via node with other stations around the world. Firstly it is needed to configure in OpenBCM the file Init.L2 which would be in the following way: ; Sample OpenBCM Layer2 Parameterfile for AX.25 ; dcall df0ar-8 ; Digicall monitor 4 mselect 0 mcalls -0 ; assign axip peer 127.0.0.1 <= IP of your local machine port 4724 ; rx-port number (udp) <= Port rx txport 4723 ; tx-port number <= Port tx Now install the XGLUE and edit the file XGLUE.INI creating a port Loop-back and another radio port. [XGLUE] LOGFILE=XGLUE.LOG TRACE=0 RECOVER=TRUE LOCK=FALSE DUAL=YES [AGW] ADDRESS=127.0.0.1 PORT=8000 LOGIN= PASSW= [XNET] ADDRESS=127.0.0.1 [XNET.PORT] p0=3,9300,93 <= Fantasy name (p0)=3 (port 2 AGWPE), ports 9300 and 93 UDP p1=1,9400,94 <= Fantasy name (p1)=1 (port 0 AGWPE), ports 9400 and 94 UDP To configure XGLUE.INI it is necessary to keep in mind the quantity and the order of ports that has installed the AGWPE in their configuration. In my config AGWPE is: Port 0 - 300 bauds. (Equivalent to the port 1 in XGLUE) Port 1 - 1200 bauds. (Equivalent to the port 2 in XGLUE) Port 2 - Loop - back (Equivalent to the port 3 in XGLUE) Autoexec.net file config in (X)Net Node: ####################### # CX2SA-5 (X)Net NODE # ####################### # #Node parameters my call CX2SA-5 my alias MINAS my tcall CX2SA-5 my defport 0 my prompt C/D/H/I/M/MH/N/Q/T/U CX2SA-5> pass mypswrd router flexnet ssid 15 # #AXIP - Ports IP ADSL attach ip0 axudp 0 1 l93 d9300 127.0.0.1 <= Port 0 (X)Net to HF (etc) attach ip1 axudp 1 1 l94 d9400 127.0.0.1 <= Port 1 (X)Net to Loop-back. attach ip2 axudp 2 1 l4723 d4724 127.0.0.1 <= Port 2 (X)Net to OpenBCM. attach ip3 axudp 3 1 142.192.172.252 attach ip4 axudp 4 1 84.82.211.249 attach ip5 axudp 5 1 81.64.180.233 attach ip6 axudp 6 1 206.86.222.211 attach ip7 axudp 7 1 l202 d202 210.89.13.157 attach ip8 axudp 8 1 195.212.7.250 # #Config Port 0 XGLUE (AGWPE) po 0 acon 0 po 0 name AX_UDP po 0 baud 38400 po 0 quality 250 po 0 dup 1 po 0 win 7 po 0 txd 25 po 0 pers 255 # #Config port 1 (X)Net po 1 acon 0 po 1 name HF_PRT po 1 baud 38400 po 1 quality 250 po 1 dup 1 po 1 win 7 po 1 txd 255 po 1 pers 17 # #Config port 2 (X)Net po 2 name OpenBCM po 2 baud 512000 po 2 dup 1 po 2 win 7 po 2 per 50 po 2 txd 0 # #Config port 3 (X)Net po 3 name WA7V-2 po 3 baud 512000 po 3 dup 1 po 3 win 7 po 3 per 50 po 3 txd 0 # #Config port 4 (X)Net po 4 name IS0HHA-7 po 4 baud 512000 po 4 dup 1 po 4 win 7 po 4 per 50 po 4 txd 0 # #Config port 5 (X)Net po 5 name VE2PKT-4 po 5 baud 512000 po 5 dup 1 po 5 win 7 po 5 per 50 po 5 txd 0 # #Config port 6 (X)Net po 6 name F4DUR-7 po 6 baud 512000 po 6 dup 1 po 6 win 7 po 6 per 50 po 6 txd 0 # #Config port 7 (X)Net po 7 name SV1CMG-11 po 7 baud 512000 po 7 dup 1 po 7 win 7 po 7 per 50 po 7 txd 0 # #Config port 8 (X)Net po 8 name F5GOV po 8 baud 512000 po 8 dup 1 po 8 win 7 po 8 per 50 po 8 txd 0 # #Config routage flexnet ro fl add 3 wa7v-2 ro fl add 4 is0hha-7 ro fl add 5 ve2pkt-4 ro fl add 6 f4dur-7 ro fl add 7 sv1cmg-11 ro fl add 8 f5gov # #Config routage broadcast ro bc add 3 wa7v-2 ro bc add 4 is0hha-7 ro bc add 5 ve2pkt-4 ro bc add 6 f4dur-7 ro bc add 7 sv1cmg-11 ro bc add 8 f5gov # #Config routage local ro lo add 0 cx2sa nd ro lo add 2 cx2sa-1 nd <= Set a CX2SA-1 OpenBCM station # #Ici on lance les services de Xnet param boot 2 4000 param boot 6 4000 # #CRON start crond # #start conversd f4bwt-2 #verification des calls #start callchkd # # statistique #start statd 3600 #start postatd #start rstatd # #TCP/IP start routed start tcpd log *** (X)Net TCPD active start telnetd log *** (X)Net TELNETD active start httpd log *** (X)Net HTTPD active start ftpd log *** (X)Net FTPD active # #Balises start beacond # BEACON ADD 900 1 NODE text GF25JP ((( (X)NET NODE MINAS ))) URUGUAY